Our wet waste compactors are the best on the market, bar none. A ballsy statement? Perhaps, but we’ve earned the title. Over our six decades in the business, facilities managers have learned they can count on our best-in-class self-contained compactor products and service.
So, if you’re looking for a wet waste compactor that keeps your workplace neat and tidy, reduces your garbage hauling costs and is a snap to operate, you’ve found it.
From start-to-finish, our 2 cubic yard self-contained compactors are quality-built:
- 1/2" steel AR plate floor with 3" structural channels
- 1/4" steel plate sides with 4" x 2" x 1/4" & 6" x 2" x 1/4" structural steel tubing with 6" channel
- Breaker bar 6" x 6" x 1" with retaining teeth
- 6" x 6" x 1/2" hydraulic cylinder mounts
- 6" fluid sump with 4" drain
- Replaceable 1/2" UHMW polyethylene wear bars on ram sides, tops and bottoms for a smooth, quiet and near frictionless operation
- Weatherproof control panel and power pack
- Removable rear & top access panels
- Synthetic biodegradable hydraulic oil
- Phosphatize-cleaned, inside and out
Our electrical and hydraulic features lead the pack:
- (PLC) Controlled power unit
- E-stop button
- Automatic single cycle
- Auto/manual selector
- Key lock on/off switch
- Low oil sensor shutdown
- Multi cycle
- 80%-100% full lights
- Automatic shutdown with auto safety retract
- 15' remote
- Fluid filled pressure gauge
- Inlet fluid strainer
- 15' hydraulic hoses
- Left or right hydraulic connections
Our wet waste compactor containers feature:
- 3/16" steel plate floor with 6" x 2" x 1/4" structural steel tubing rails with 1/2" x 2" steel bottom wear bars
- 3/16" steel plate side, roof and door
- Full 3/4" thick door seal
- Side and bottom ratchet latch door hinges with grease fittings
- Double end pick-up (standard with outside rail cable pull)
- Tapered width from 80" at compactor to 88" at door (inside dimensions)
- Exclusive side or bottom ratchet door and latch system with heavy duty hinges and grease fittings.
These wet waste compactors conform to all ANSI Z 245.2 safety standards.
Looking for the skinny on our wet waste compactors? Here it is.
Model |
NSC-200-25 |
Length |
20' |
Width |
8'5" |
Height |
8'6" |
Loading Height |
4' |
Approx. Weight |
10,500 lbs |
Compactor Capacity |
2 cu yd |
Compactor Floor |
3/8" AR steel plate with 3" structural channels |
Compactor Sides |
1/4" steel plate sides with 4" x 2" x 1/4" & 6" x 2" x 1/4" structural steel tubing with 6" channel |
Container Capacity |
25 cu yd |
Container Floor |
3/16" steel plate with 6" x 2" x 1/4" structural steel tubing rails with 1/2" x 2" steel bottom wear bars |
Container Sides & Top |
3/16" steel plate |
Container Width |
Tapered front to rear |
Full Door Seal |
3/4" thick |
Ram Face & Bottom |
3/8" AR steel plate |
Platen Area |
5' x 3'8" x 3' |
Charge Opening |
3'6" x 5" |
Ram Penetration |
1' |
Breaker Bar |
6" x 6" x 1" with retaining teeth |
Twin Bypass Cylinders |
4" x 3'6" x 2-1/2" |
Hydraulic Cylinder Mounts |
6" x 6" x 1/2" |
Hydraulic Fluid |
Biodegradable |
Wear Bars |
Replaceable 1/2" UHMW polyethylene |
Line Pressure |
2,000 psi |
Max Line Pressure |
2,500 psi |
Max Ram Force |
63,000 lbs |
Cycle Time |
45 sec |
Fluid Capacity |
35 gal |
Pump |
10-1/2 gpm |
Motor |
10 hp 3-phase or single phase inverter |

(All measurements are outside dimensions)
With a range of options, you can customize our self-contained compactors to meet your specific needs:
- 10 HP 230V, single phase
- Fluid reservoir heater
- Open hopper (for dock or ground loading)
- Enclosed doghouse with door and interlock
- Walk on or drive on deck with 42" safety rails
- Side loading hoppers
- Through-the-wall chutes
- Cart dumper system
- Container guide rails
- Hydraulic tailgate
- Fullness monitoring system
We believe in the compactors we've designed and manufactured. It's why we can confidently offer the industry's best warranty.
Nedland Compactor Warranty