2 Yard Stationary Compactor
Exceptional compaction force. Quiet operation.
Ideally suited for retail, hotel, and healthcare applications.
- Red Enamel
- Blue Enamel
- Maroon Enamel
- Medium Blue
- Armor Yellow
- Allied Blue
- Nedland Gray
- U.S. Waste Green
- Chicagoland Gray
- Forest Green
- Brown Cocoa Enamel
- Shamrock Green
- Dark Brown
- Orange
- Black Enamel
- Beige
From the UHMW-nylon-lined ram to the completely submerged motor, Nedland’s 2-yard stationary compactor is built to last.
- Most advanced electrical and hydraulic system on the market
- Industry’s highest quality UL and ETL-listed components
- Lowest-maintenance-cost design, including bypass cylinders for extended life
- Quietest operation in the industry, thanks to replaceable UHMW polyethylene wear bars
- Resists chips, scratches, and fading with phosphate-cleaned and powder-coat primed and painted interior and exterior surfaces
- Can be customized to suit the unique needs of your application
- Exceptional service—before and after the sale
Compactor features:
- Replaceable UHMW polyethylene wear bars on all sides and bottoms for smooth, quiet, nearly frictionless operation and extended life
- Bypass cylinders for extended life
- Removable rear access panel
- Weatherproof control panel and power pack
- Container guide rails
- Bypass cylinders for extended life
Electric and hydraulic features:
- Controller power unit (PLC)
- Automatic shutdown with auto safety retract
- E-stop button
- Auto/manual selector
- Key lock on/off switch
- Automatic single cycle
- Multi-cycle timer
- Reverse button
- Remote control
- 80% and 100% full lights
- Fluid level and temp gauge
- Fluid-filled pressure gauge
- Inlet fluid strainer
- Left or right side hydraulic and electrical connections
- Low oil sensor shutdown
- Submersible power unit
- Synthetic biodegradable hydraulic fluid
All units phosphate cleaned and powder-coat primed and painted on all interior and exterior surfaces to resist chips, scratches, and fading.
This stationary compactor conforms to all ANSI Z 245.2 safety standards.
| Model | NC-200 |
| Compactor Capacity | 2 cu yd |
| Length | 7′ |
| Width | 6’1″ |
| Height | 4’9″ |
| Loading Height | 4’3″ |
| Approx. Weight | 4,450 lbs |
| Compactor Floor | 3/8″ steel AR plate with 3″ and 6″ structural steel channel |
| Compactor Sides | 1/4″ steel plate with 4″ x 2″ x 1/4″ and 6″ x 2″ x 1/4″ structural steel tubing |
| Ram Face & Bottom | 3/8″ AR steel plate |
| Platen Area | 5′ x 3’8″ x 3′ |
| Charge Opening | 3’8″ x 5′ |
| Ram Penetration | 12″ |
| Breaker Bar | 6″ x 6″ x 1″ with retaining teeth |
| Twin Bypass Cylinders | 4″ x 3’6″ x 2-1/2″ |
| Hydraulic Cylinder Mounts | 1/2″ steel plate |
| Hydraulic Hose | 15′ |
| Hydraulic Fluid | Biodegradable |
| Wear Bars | Replaceable 1/2″ UHMW polyethylene |
| Line Pressure | 2,000 psi |
| Max Line Pressure | 2,500 psi |
| Max Ram Force | 63,000 lbs |
| Cycle Time | 45 sec |
| Fluid Capacity | 35 gal |
| Pump | 10-1/2 gpm |
| Remote Control | 15′ |
| Motor | 10 HP 3-phase or single phase inverter |
(All measurements are outside dimensions)

Compatible receiver containers:
| Model | Volume |
|---|---|
| NROR-2114 | 21 cu yd |
| NROR-2416 | 24 cu yd |
| NROR-2514 | 25 cu yd |
| NROR-2718 | 27 cu yd |
| NROR-2816 | 28 cu yd |
| NROR-3018 | 30 cu yd |
| NROR-4020 | 40 cu yd |
| NROR-4222 | 42 cu yd |
We’ll work with you to customize your stationary waste compactor. Select from the following options:
- Cart dumper system
- Container guide rails
- Driver pack out
- Enclosed doghouse with door and interlock
- Fluid reservoir heater
- Fullness monitoring system
- Open hopper for loading dock or ground loading
- Photo eye
- Side-loading hoppers
- Through-the- wall chutes
- Walk on or drive on deck with 42″ safety rails
We believe in the stationary compactors we’ve designed and manufactured. It’s why we can confidently offer the industry’s best warranty.
