1 Yard Stationary Compactor

Small footprint. Exceptional compaction force. Quiet operation. Ideally suited for retail, hotel, and healthcare applications.

Get a quote

Category: Tag:

Your space constraints may dictate a stationary compactor with a small footprint—but that doesn’t mean you have to sacrifice when it comes to compacting power. In fact, the NC-100 delivers the same power as a commercial compactor twice its size.

Cut your garbage hauling costs. This 1 cubic yard compactor is quality-built, quiet, safe and simple to operate, and customizable to suit the unique needs of your application.

The Nedland 1 cubic yard stationary compactor will work hard for you, thanks to solid construction and features, like:

  • Bypass cylinders for extended life
  • Replaceable 1/2” UHMW polyethylene wear bars on ram sides and top and bottoms of platen for smooth, quiet, near-frictionless operation and extended life
  • Weatherproof control panel and power pack
  • Removable rear access panel
  • Container guide rails
  • Phosphatized-cleaned and powder-coat primed and painted on all interior and exterior surfaces to resist chips, scratches, and fading

Get industry-leading electrical and hydraulic features:

  • PLC-controlled power unit to prevent short stroking and compactor arm damage
  • Submersible power unit for continuous lubrication
  • Synthetic biodegradable hydraulic oil to support your commitment to sustainability
  • Industry’s highest quality UL and ETL listed components
  • Industry’s most advanced electrical and hydraulic system
  • E-stop button
  • Automatic single cycle
  • Auto/manual selector
  • Key lock on/off switch
  • Low oil sensor shutdown
  • Multi-cycle 80% - 100% full light
  • Automatic shutdown with auto safety retract
  • 15’ remote
  • Fluid level and temp gauge
  • Fluid-filled pressure gauge
  • Inlet fluid strainer
  • 15’ hydraulic hoses
  • Left or right side hydraulic connections

A range of receiver container sizes are compatible with the 1-yard stationary compactor, ensuring you get a set-up that perfectly suits your needs:

  • 2 yd rear load
  • 4 yd rear load
  • 6 yd rear load
  • 8 yd rear load
  • 2 yd front load
  • 4 yd front load
  • 6 yd front load
  • 8 yd front load

This stationary compactor conforms to all ANSI Z 245.2 safety standards.

This small commercial compactor will fit your small space—and still pack a punch.

Model NC-100
Length 5'4"
Width 4'10"
Height 4'1"
Loading Height 3'7"
Approx. Weight 3,400 lbs
Compactor Capacity 1 cu yd
Compactor Floor 3/8" steel AR plate with 3" structural channels
Compactor Sides 1/4" steel plate with 3" x 2" x 1/4" structural steel tubing
Ram Face & Bottom 3/8" AR steel plate
Platen Area 3' x 2'7-1/2" x 4'
Charge Opening 2'7" x 4'
Ram Penetration 8"
Breaker Bar 6" x 6" x 1/2" with retaining teeth
Twin Bypass Cylinders 2-1/2" x 3' x 1-1/2"
Hydraulic Cylinder Mounts 1/2" steel plate
Hydraulic Fluid Biodegradable
Wear Bars Replaceable 1/2" UHMW polyethylene
Line Pressure 2,000 psi
Max Line Pressure 2,500 psi
Max Ram Force 19,500 lbs
Cycle Time 40 sec
Fluid Capacity 35 gal
Pump 5 gpm
Motor 5 hp/tri-volt, 3-phase or single-phase inverter

(All measurements are outside dimensions)

1 cubic yard compactor dimensions
Side
1 cubic yard compactor dimensions
Top

Download our spec sheet

We’re happy to help you customize your stationary compactor.

Options include:

  • 5 HP 3-phase motor with a single-phase inverter
  • Fluid reservoir heater
  • Driver pack out
  • Open hopper
  • Enclosed doghouse with a door and interlock
  • Walk on or drive on deck with 42” safety rails
  • Side loading hoppers
  • Through-the-wall chutes
  • Cart dumper
  • Fullness monitoring system
 
 

We believe in the compactors we've designed and manufactured. It's why we can confidently offer the industry's best warranty.

Nedland Compactor Warranty

Scroll to Top