When you manage a facility, you know meeting exacting sanitation and workplace safety standards are a must. So, if you’re looking for a self-contained compactor to help meet those expectations, look no further.
Offering simple, safe operation and a design that’s perfect for tight spaces, our self-contained trash compactors will get the job done—and save you money while they’re at it.
Our 1 yard self-contained compactors are quality-built:
- 1/4" steel AR plate floor
- 3/16" steel plate sides with 3" x 2 1/4" structural steel tubing
- Breaker bar 6" x 6" x 1/2" with retaining teeth
- 1/2" steel plate hydraulic cylinder mounts
- Replaceable 1/2" UHMW polyethylene wear bars on all sides, tops and bottoms for a smooth, quiet and frictionless operation
- Weatherproof control panel and power pack
- Hinged/sealed lockable clean out door and top access panel
- Synthetic biodegradable hydraulic oil
- Phosphatize-cleaned, inside and out
What’s more, our electrical and hydraulic features can’t be beat:
- Controlled power unit, or PLC
- E-Stop button
- Multi-cycle timer
- Remote control
- Automatic single cycle
- Reverse button
- 80% and 100% full lights
- Automatic shutdown
- Keyed override switch
- Inlet fluid strainer
- Moveable left or right side hydraulic and electrical connections
Our commercial trash compactor container features:
- 1/8" steel plate floor with 4" x 2" x 1/4" structural steel tubing
- 1/4" steel plate sides and top
- Full 3/4" thick door seal
- Ratchet latch door closer
- Heavy duty hinges with grease fitting
- Tapered width from 58" at compactor to 68" at door
- Exclusive side or bottom ratchet door and latch system with heavy duty hinges and grease fittings
This self-contained compactor conforms to all ANSI Z 245.2 safety standards.
Want the nuts and bolts?
Model |
NSC-100-15 |
Length |
15'11" |
Width |
8'5" |
Height |
7'10" |
Loading Height |
4' |
Approx. Weight |
5,900 lbs |
Compactor Capacity |
1 cu yd |
Compactor Floor |
3/8" AR steel plate with 3" structural channels |
Compactor Sides |
1/4" steel plate with 3" x 2-1/4" structural steel tubing |
Container Capacity |
15 cu yd |
Container Floor |
3/16" steel plate with 4" x 2" x 1/4" structural steel tubing |
Container Sides & Top |
3/16" steel plate |
Container Width |
Tapered front to rear |
Full Door Seal |
3/4" thick |
Ram Face & Bottom |
3/8" AR steel plate |
Platen Area |
3' x 2'7-1/2" x 4' |
Charge Opening |
2'7" x 4' |
Ram Penetration |
10" |
Breaker Bar |
6" x 6" x 1/2" with retaining teeth |
Twin Bypass Cylinders |
2-1/2" x 3' x 1" |
Hydraulic Cylinder Mounts |
1/2" steel plate |
Hydraulic Fluid |
Biodegradable |
Wear Bars |
Replaceable 1/2" UHMW polyethylene |
Line Pressure |
1,500 psi |
Max Line Pressure |
1,950 psi |
Max Ram Force |
19,000 lbs |
Cycle Time |
40 sec |
Fluid Capacity |
2 gal |
Pump |
5 gpm |
Motor |
5 hp/tri-volt, 3-phase or single-phase inverter |
(All measurements are outside dimensions)
Download our Spec Sheet
Customize your self-contained trash compactor and ensure a just-right solution:
- 5 Hp -230V, single phase
- Fluid reservoir heater
- Open hoppers (for loading dock or ground loading)
- Enclosed doghouse with door and interlock
- Walk on or drive on deck with 42" safety rails
- Side loading hoppers
- Through-the-wall chutes
- Cart dumper
- Container guide rails
- Fullness monitoring system
We believe in the compactors we've designed and manufactured. It's why we can confidently offer the industry's best warranty.
Nedland Compactor Warranty