Looking for a stationary compactor that will fit your small space, yet still packs some serious power?
The NC-50 model is ideally suited for your small trash room:
- Same power as a stationary compactor twice its size
- Quietest unit in the industry thanks to rams wrapped in UHMW nylon
- One-sided container connection system comes standard, ensuring you can easily connect/disconnect the container from the compactor despite tight space constraints
- Units can be customized to suit your unique application
Developing a new construction project?
With Nedland as your partner, you’ll have the expert guidance you need to ensure your new construction project effectively plans for waste management—whether you’re building a high-rise apartment building or hotel, a hospital, or an office building.
The NC-50 stationary compactor container features:
- Bypass cylinders for extended life
- Replaceable 1/2" UHMW polyethylene wear bars on all sides and bottoms for smooth, quiet, nearly frictionless operation and extended life
- Weatherproof control panel and power pack
- Removable rear access panel
- Container guide rails
- Phosphatized-cleaned and powder-coat primed and painted on all interior and exterior surfaces to resist chips, scratches, and fading
The NC-50 also delivers these electric and hydraulic features:
- PLC-controlled power unit to prevent short stroking and compactor arm damage
- Submersible power unit for continuous lubrication
- Industry’s highest quality UL and ETL listed components
- Industry’s most advanced electrical and hydraulic system
- Synthetic biodegradable hydraulic oil to support your commitment to sustainability
- E-stop button
- Automatic single cycle
- Auto/manual selector
- Key lock on/off switch
- Low oil sensor shutdown
- Multi-cycle
- 80% - 100% full lights
- 15' remote
- Automatic shutdown with auto safety retract
- Fluid level and temp gauge
- Fluid-filled pressure gauge
- Inlet fluid strainer
- 15’ hydraulic hoses
- Left or right side hydraulic connections
The NC-50 receiver is compatible with the following compactor container sizes:
- 2 yd rear load
- 3 yd rear load
- 4 yd rear load
- 6 yd rear load
- 8 yd rear load
- 2 yd front load
- 3 yd front load
- 4 yd front load
- 6 yd front load
- 8 yd front load
We have the compactor that’s the just-right fit for your small space.
We have the compactor that’s the just-right fit for your small space.
| Overall length |
48" |
| Overall width |
40" |
| Overall height |
47" |
| Compactor floor |
1/2" steel AR plate with 3" structural channels |
| Compactor sides |
1/4" steel plate with 3" x 2" x 1/4" structural steel tubing |
| Compactor capacity |
1/2 cubic yard |
| Platen area |
20 1/2" x 28 1/2" x 29 1/2" |
| Charge opening |
20 1/2" x 29 1/2" |
| Ram penetration |
4" |
| Breaker bar |
6" x 6" x 1/2" with retaining teeth |
| Twin bypass cylinders |
2 1/2" x 20" x 1 1/2" |
| Hydraulic cylinder mounts |
Hydraulic cylinder mounts: 1/2" steel plate |
| Line pressure |
2000 PSI |
| Max line pressure |
2500 PSI |
| Max ram force |
21000 LBS |
| Cycle time |
40 Seconds |
| Fluid capacity |
35 Gallons |
| Pump |
5 GPM |
| Motor |
5 HP/Tri-Volt, 3 Phase |
| Loading height |
41" |
| App. shipping weight |
2900 Lbs |
(All measurements are outside dimensions)
Download our floor plan
See our cover sheet
See our spec sheet
With a range of options, you can customize your small stationary compactors to perfectly suit your unique needs:
- 5 HP 3-phase motor with a single-phase inverter
- Fluid reservoir heater
- Photo-eye
- Safety beacon and horn
- Driver pack out
- Open hopper for loading dock or ground loading
- Enclosed doghouse with a door and interlock
- Walk on or drive on deck with 42" safety rails
- Sideloading hoppers
- Through-the-wall chutes
- Fullness monitoring system
We believe in the compactors we've designed and manufactured. It's why we can confidently offer the industry's best warranty.
Nedland Compactor Warranty
