Compare roll-off systems.
When it comes to roll-off systems, you absolutely get what you pay for.
Roll-off systems are not only the workhorses of the dumpster rental business—they power construction, roofing, landscaping, and remodeling companies, as well.
So, finding trucks, trailers, dumpsters, and accessories that will drive your business safety and efficiency is critical.
With so many systems on the market, though, assessing the options can be more than a little overwhelming. That’s why we’ve done the research for you.
|This block-and-tackle setup means cable never touches cable—dramatically reducing maintenance, increasing longevity, and delivering quiet, safe, smooth operation.
|Kolar, Briggs—or even a 12-volt power unit
|13 HP Honda engine with 2-stage pump
|With the highest-performance engine in its class, you can get more pulls in a day (and more dollars in your pocket).
|Welded leaf springs—or welded torflex axles
|Bolted torflex axles
|With fewer moving parts and a bolted set-up, you’ll get a smoother ride and your axles will be easier to replace.
|Sprayed on enamels
|Powder-coated primer and paint
|A high UV rating paint job means your roll-off system will resist chips and fading.
|Hubs – Lubrication
|Easily monitor fluid levels and maintain them.
|Manual control levers, a stationary mount, and pendants with coil cords
|Wireless remote with manual backup controls
|Freely move around your roll-off truck or trailer for a better vantage point as you’re placing boxes (helping prevent damage to customer property).
|Electric solenoid valves with LED light indicator and manual override
|You get a roll-off system that’s easy to diagnose in the uncommon event of a malfunction. Meanwhile, the manual override enables your driver to continue operating the system without the hand pendant.
|Safety Lock Valves
|You get increased operator safety and peace of mind.
|No grease zerks or grease zerks with questionable placement
|Grease zerks with ease of use in mind
|Recessed grease zerks on every shaft enable easy maintenance and minimal to non-existent breakage.
|No figure 8 grease grooves—a design that makes it very difficult to remove the shafts and get to the bushings
|Figure 8 grease groove on all rail rollers and sheaves
|You get bronze bushings that are easily replaced. What’s more, the figure 8 grease grooves cut into the bushings, allowing you to grease the entire shaft in a single rotation of the part.
|Fenders that are easy to replace in the event of an accident. (Lack of cutting and welding to your roll-off trailer frame minimizes paint damage.)
|Tires – Replacement
|Traditional jack is required
|No jack required
|Tipp frame and hydraulic tongue jack lifts all four tires off the ground for easy maintenance.
Know what you’re buying before you sign on the dotted line.
Have questions? Give us a shout.
Call us at 1-800-447-4925 or send us a message. We’re happy to help.