Need to manage wet waste? Squeezed for space? Our small self-contained compactors deliver among the largest compaction forces in the waste equipment industry—all on a compact footprint. We’ll even customize yours to suit the unique needs of your application.
What’s more, we design and manufacture a high-quality self-contained compactor that will stand the test of time. It’s why we can confidently deliver the industry’s best warranty (five years).
Our 0.5 yard self-contained compactor with 9 cubic yard container features quality construction, including:
- The industry’s only secondary bottom rear door lock to prevent leakage
- Fully-sealed, side hinged clean-out door and top access panel for ease of cylinder maintenance and cleaning
- Bypass cylinders for extended life
- Replaceable 1/2″ UHMW nylon on all sides, tops, and bottoms for smooth, quiet, near-frictionless operation and extended life
- Weatherproof control panel and power pack
- Phosphatize-cleaned, primed, and painted inside and out to look better, longer
Our electrical and hydraulic system is second to none. It includes:
- PLC-controlled power unit to prevent short stroking and compactor arm damage
- Submersible power unit for continuous lubrication
- Synthetic biodegradable hydraulic oil to support your commitment to sustainability
- Industry’s highest quality UL and ETL listed components
- E-stop button
- Multi-cycle timer
- Remote control
- Automatic single cycle
- Reverse button
- 80% and 100% full lights
- Automatic shutdown
- Keyed override switch
- Moveable left or right side hydraulic and electrical connections
The container itself features:
- Ratchet latch door closer
- Heavy duty hinges with grease fittings
- Exclusive side or bottom ratchet door and latch system
This self-contained compactor conforms to all ANSI Z 245.2 safety standards.
Here’s the lowdown on our smallest self-contained compactor.
Model |
NSC-50-9 |
Length |
13' |
Width |
6'6" |
Height |
7' |
Loading Height |
4' |
Approx. Weight |
4,600 lbs |
Compactor Capacity |
½ cu yd |
Compactor Floor |
3/8" AR steel plate with 3" structural channels |
Compactor Sides |
1/4" steel plate with 3" x 2-1/4" structural steel tubing |
Container Capacity |
9 cu yd |
Container Floor |
3/16" steel plate with 4" x 2" x 1/4" structural steel tubing |
Container Sides & Top |
3/16" steel plate |
Container Width |
Tapered front to rear |
Full Door Seal |
3/4" thick |
Ram Face & Bottom |
3/8" AR steel plate |
Platen Area |
1'8-1/2" x 2'4-1/2" x 2'5-1/2" |
Charge Opening |
1'8-1/2" x 2'5-1/2" |
Ram Penetration |
4" |
Breaker Bar |
6" x 6" x 1/2" with retaining teeth |
Twin Bypass Cylinders |
2-1/2" x 1'8" x 1-1/2" |
Hydraulic Cylinder Mounts |
1/2" steel plate |
Hydraulic Fluid |
Biodegradable |
Wear Bars |
Replaceable 1/2" UHMW polyethylene |
Line Pressure |
1,500 psi |
Max Line Pressure |
1,950 psi |
Max Ram Force |
19,000 lbs |
Cycle Time |
40 sec |
Fluid Capacity |
2 gal |
Pump |
5 gpm |
Motor |
5 hp/tri-volt, 3-phase or single-phase inverter |
(All measurements are outside dimensions)
Download our spec sheet
Want to customize your self-contained compactor? Not a problem.
Choose:
- 5 HP 3-phase with single phase inverter
- Fluid reservoir heater
- Open hopper (for loading docks or ground loading)
- Enclosed doghouse with door and interlock
- Walk on or drive on deck with 42" safety rails
- Side loading hoppers
- Through-the-wall-chutes
- Container guides rails
- Fullness monitoring system
We believe in the compactors we've designed and manufactured. It's why we can confidently offer the industry's best warranty.
Nedland Compactor Warranty