The Nedland 4 cubic yard stationary compactor is not only the largest, most powerful industrial compactor we offer—it’s the best option available on the market today.
Built using the most advanced electrical and hydraulic systems on the market, these compactors also feature UHMW nylon-lined rams and submerged power units to deliver the lowest maintenance cost design, quietest operation, and longest life in the waste management industry. What’s more, you can customize your unit to meet the specific needs of your application.
Your industrial compactor will feature:
Bypass cylinders for extended life
Replaceable 1/2" UHMW polyethylene wear bars on ram sides and bottoms of platen for a smooth, quiet, and near-frictionless operation
Weatherproof control access panel
Container guide rails
Phosphatized-cleaned and powder-coat primed and painted on all interior and exterior surfaces to resist chips, scratches, and fading
Get industry-leading electrical and hydraulic features:
Industry’s highest quality UL and ETL listed components
Industry’s most advanced electrical and hydraulic system
PLC-controlled power unit to prevent short stroking and compactor arm damage
Submerged power unit for continuous lubrication
Synthetic biodegradable hydraulic oil to support your commitment to sustainability
E-stop button
Auto/manual selector
Key lock on/off switch
Low oil sensor shutdown
Multi-cycle
80% - 100% full lights
15' remote
Fluid level and temp gauge
Fluid-filled pressure gauge
Inlet fluid strainer
15’ hydraulic hoses
Left or right side hydraulic connections
Choose the compatible receiver containers that best suit the specific needs of your business:
16 yd x 12'
21 yd x 14'
25 yd x 16'
30 yd x 18'
40 yd x 20'
This stationary compactor conforms to all ANSI Z 245.2 safety standards.
This thing is a horse. Just look.
Model
NC-400
Length
16'6"
Width
6'6"
Height
5'4"
Loading Height
4'9"
Approx. Weight
9,750 lbs
Compactor Capacity
4 cu yd
Compactor Floor
3/8" steel AR plate with 3" and 6" structural steel channel
Compactor Sides
1/4" steel plate with 3" and 6" structural steel channels and 6" x 2" x 1/4" structural steel tubing
Ram Face & Bottom
3/8" AR steel plate
Platen Area
Charge Opening
5' x 6'6"
Ram Penetration
1'2"
Breaker Bar
6" x 6" x 1" with 5/8" support plates and retaining teeth
