If your industry places a priority on sanitation and workplace safety, our self-contained commercial compactors are your ideal waste management solution.
Used by facility managers—even when space is limited, our quality-built compactors help you maintain a clean work environment, reduce garbage hauling costs, and reduce offensive odors.
Our commercial compactor products and service are simply unmatched.
Our 2 yard self-contained commercial compactor is quality-built:
- 1/2" steel AR plate floor with 3" structural channels
- 1/4" steel plate sides with 4" x 2" x 1/4" and 6" x 2" x 1/4" structural steel tubing with 6" channel
- Breaker bar 6" x 6" x 1" with retaining teeth
- 6" x 6" x 1/2" hydraulic cylinder mounts 6" fluid sump with 4" drain
- Replaceable 1/2" UHMW polyethylene wear bars on ram sides, tops and bottoms for a smooth, quiet and near frictionless operation
- Weatherproof control panel and power pack
- Removable rear and top access panels
- Synthetic biodegradable hydraulic oil
- Phosphatize-cleaned, inside and out
Our electrical and hydraulic features are top-notch:
- (PLC) Controlled power unit
- E-stop button
- Automatic single cycle
- Auto/manual selector
- Key lock on/off switch
- Low oil sensor shutdown
- Multi cycle
- 80%-100% full lights
- Automatic shutdown with auto safety retract
- 15' remote
- Fluid filled pressure gauge
- Inlet fluid strainer
- 15' hydraulic hoses
- Left or right hydraulic connections
Our commercial compactor containers feature:
- 3/16" steel plate floor with 6" x 2" x 1/4" structural steel tubing rails with 1/4" x 2" steel bottom wear bars
- 3/16" steel plate side, roof and door
- Full 3/4" thick door seal
- Double end pick-up (standard with outside rail cable pull)
- Tapered width from 80" at compactor to 88” to door (inside dimensions)
- Exclusive side and bottom ratchet door and latch system with heavy duty hinges and grease fittings
Here’s the lowdown on our 2 yard self-contained compactors.
| Model |
NSC-200-30 |
| Length |
22'4" |
| Width |
8'5" |
| Height |
8'6" |
| Loading Height |
4' |
| Approx. Weight |
10,700 lbs |
| Compactor Capacity |
2 cu yd |
| Compactor Floor |
3/8" AR steel plate with 3" structural channels |
| Compactor Sides |
1/4" steel plate sides with 4" x 2" x 1/4" and 6" x 2" x 1/4" structural steel tubing with 6" channel |
| Container Capacity |
30 cu yd |
| Container Floor |
3/16" steel plate with 6" x 2" x 1/4" structural steel tubing rails with 1/2" x 2" steel bottom wear bars |
| Container Sides & Top |
3/16" steel plate |
| Container Width |
Tapered front to rear |
| Full Door Seal |
3/4" thick |
| Ram Face & Bottom |
3/8" AR steel plate |
| Platen Area |
5' x 3'8" x 3' |
| Charge Opening |
3'6" x 5" |
| Ram Penetration |
1' |
| Breaker Bar |
6" x 6" x 1" with retaining teeth |
| Twin Bypass Cylinders |
4" x 3'6" x 2-1/2" |
| Hydraulic Cylinder Mounts |
6" x 6" x 1/2" |
| Hydraulic Fluid |
Biodegradable |
| Wear Bars |
Replaceable 1/2" UHMW polyethylene |
| Line Pressure |
2,000 psi |
| Max Line Pressure |
2,500 psi |
| Max Ram Force |
63,000 lbs |
| Cycle Time |
45 sec |
| Fluid Capacity |
35 gal |
| Pump |
10-1/2 gpm |
| Motor |
10 hp 3-phase or single phase inverter |
(All measurements are outside dimensions)

Download our Spec Sheet
Want to customize your commercial compactor? We can help.
Options include:
- Cart dumper system
- Container guide rails
- Enclosed doghouse with door and interlock
- Fluid reservoir heater
- Fullness monitoring system
- Open hopper for loading dock or ground loading
- Photo eye
- Side-loading hoppers
- Through-the- wall chutes
- Walk on or drive on deck with 42" safety rails
We believe in the compactors we've designed and manufactured. It's why we can confidently offer the industry's best warranty.
Nedland Compactor Warranty