2 Cubic Yard Stationary Compactor

Exceptional compaction force. Quiet operation. Ideally suited for department stores, manufacturing facilities, and distribution centers.

Get a quote

Category: Tag:

From the UHMW nylon-lined ram to the completely submerged motor, Nedland’s industrial waste compactor delivers the most advanced electrical and hydraulic systems, the lowest maintenance cost design, and the quietest operation in the industry. What’s more, Nedland compactors can be customized to suit the unique needs of your application.

Nedland compactors are built to last.

The Nedland 2 cubic yard stationary compactor is quality-built:

  • Bypass cylinders for extended life
  • Replaceable 1/2" UHMW polyethylene wear bars on ram sides, and top and bottoms of the platen for smooth, quiet, near-frictionless operation and extended life
  • Weatherproof control panel and power pack
  • Removable rear access panel
  • Container guide rails
  • Phosphatized-cleaned and powder-coat primed and painted on all interior and exterior surfaces to resist chips, scratches, and fading

Count on Nedland's industry-leading electrical and hydraulic features:

  • PLC-controlled power unit to prevent short stroking and compactor arm damage
  • Submersible power unit for continuous lubrication
  • Synthetic biodegradable hydraulic oil to support your commitment to sustainability
  • Industry’s highest quality UL and ETL listed components
  • Industry’s most advanced electrical and hydraulic system
  • E-stop button
  • Automatic single cycle
  • Auto/manual selector
  • Low oil sensor shutdown
  • Multi-cycle 80% - 100% full lights
  • Automatic shutdown with auto safety retract 15' remote
  • Fluid level and temp gauge
  • Fluid-filled pressure gauge
  • Inlet fluid strainer 15' hydraulic hoses
  • Left or right side hydraulic connections

Select the receiver container size that best fits your business needs:

  • 16 yd x 12'
  • 21 yd x 14'
  • 25 yd x 16'
  • 30 yd x 18'
  • 40 yd x 20'

This stationary compactor conforms to all ANSI Z 245.2 safety standards.

Need details on our industrial waste compactors? You've got it.

Model NC-200
Length 7'
Width 6'1"
Height 4'9"
Loading Height 4'3"
Approx. Weight 4,450 lbs
Compactor Capacity 2 cu yd
Compactor Floor 3/8" steel AR plate with 3" and 6" structural steel channel
Compactor Sides 1/4" steel plate with 4" x 2" x 1/4" and 6" x 2" x 1/4" structural steel tubing
Ram Face & Bottom 3/8" AR steel plate
Platen Area 5' x 3'8" x 3'
Charge Opening 3'8" x 5'
Ram Penetration 1'
Breaker Bar 6" x 6" x 1" with retaining teeth
Twin Bypass Cylinders 4" x 3'6" x 2-1/2"
Hydraulic Cylinder Mounts 1/2" steel plate
Hydraulic Fluid Biodegradable
Wear Bars Replaceable 1/2" UHMW polyethylene
Line Pressure 2,000 psi
Max Line Pressure 2,500 psi
Max Ram Force 63,000 lbs
Cycle Time 45 sec
Fluid Capacity 35 gal
Pump 10-1/2 gpm
Motor 10 HP 3-phase or single phase inverter

(All measurements are outside dimensions)

2 cubic yard compactor dimensions
Side
2 cubic yard compactor dimensions
Top

Download our spec sheet

We’ll work with you to customize your stationary waste compactor. Select from the following options:

  • 10 HP 3-phase motor with a single-phase inverter
  • Fluid reservoir heater
  • Driver pack out
  • Open hopper (for loading dock or ground loading)
  • Enclosed doghouse with door and interlock
  • Walk on or drive on deck with 42" safety rails
  • Side loading hoppers
  • Through-the-wall chutes
  • Cart dumper
  • Fullness monitoring system

We believe in the compactors we've designed and manufactured. It's why we can confidently offer the industry's best warranty.

Nedland Compactor Warranty

Scroll to Top