Roll-Off Systems

EZrolloff Roll-Off Trailers

Nedland roll-off trailers deliver the exceptional construction, performance, and longevity you’d expect from big roll-off trucks—without the CDL requirement.

Steel Product Color

Hoist Rated Capacity

12,000 lbs.
16,000 lbs.
20,000 lbs.
24,000 lbs.

Clear

Category: Roll-Off Systems

Widely recognized as the leading roll-off trailers on the market, you’ll get the high-quality construction you’d expect from the big trucks—but you won’t need a CDL to operate it.

Using a standard outside cable pull, you’ll pull your dumpsters from the bottom rather than the top for greater control. We also use industry-standard rails. Not only does that give you the freedom to service dumpsters from both roll-off trailers and large roll-off trucks, it means you can purchase your dumpsters from nearly any manufacturer. Meaning, we don’t lock you into our roll-off dumpsters as some manufacturers do.

Lowest cost maintenance design. Industry’s best warranty. EZrolloff delivers the ease and dependability your business can rely on.

Reeving cylinder cable system with a UHMW slide pulley block and tackle set-up to ensure cable never comes in contact with itself for reduced maintenance and safe, quiet operation
13 HP Honda engine with 2-stage pump for exceptional pull performance
4-function wireless remote with back-up manual controls for greater control over where dumpsters are placed
Manual override to continue operating the roll-off system without the hand pendant
Counterbalanced safety lock valves directly mounted on hydraulic cylinders for improved worker safety
Tipp frame and hydraulic tongue jack to lift all 4 tires off the ground for easy maintenance
Recessed grease zerks on every shaft make for easy maintenance, ensuring minimal-to-non-existent breakage
Bronze bushings with figure-8 grease grooves on all rail rollers and sheaves to grease the entire shaft in a single rotation of the part
Electric solenoid valves with LED light indicators to easily diagnose issues in the uncommon event of a malfunction
Oil bath hubs to easily monitor and maintain fluid levels
Oil filter and fluid temperature gauges for proper maintenance
Bolted-on torflex axles for a smooth ride and easy replacement
Bolted-on fenders for easy replacement
Phosphatized-cleaned and powder-coat primed and painted frame to resist chips, scratches, and fading
Pintel or detachable gooseneck hitch for added towing flexibility
Synthetic biodegradable hydraulic oil to support your commitment to environmentally-friendly operation

Trailer Unit	Dimensions	Approx. Weight
12,000 lb	100” W x 211” L	3500 lbs
16,000 lb	101” W x 261” L	4530 lbs
20,000 lb	101” W x 261” L	5420 lbs
24,000 lb	101” W x 261” L	6190 lbs

51-degree dump angle
6” x 3” x 3/8” wall tube hoist frame
5” x 3” x 3/8” wall tube main frame
5/8” plate front stops
Automatic mechanical safety locks
(2) 4” x 48” x 2” chrome rods hoist cylinders
(2) 4” x 48” x 2” nitro rods winch cylinders
5/8” Cable
3” O.D. with bronze bearing, greaseable outside rollers
8” O.D with bronze bearing, greaseable cable sheaves
192” cable travel
1-1/2” solid hinge shaft with grease zerks
25 cubic yard maximum dumpster size
13 HP Honda engine with electric start, backup recoil start, and 10/2 gpm pump at 2000 psi
Primed to 1.5 mil and painted to 1.5 mil on entire frame surface
Aluminum diamond plate motor cover
Tread Plate side steps
(12) 16.5 LT load F tires
Torflex axles 8,000 lbs with electric brakes
16-gallon reservoir/dual filtration
Approximate operating times: 22 seconds down, 53 seconds on, 47 seconds off