1 Cubic Yard Stationary Compactor

Small footprint. Exceptional compaction force. Quiet operation. Ideally suited for applications where space is limited.

Category: Tag:

Your space constraints may dictate a small stationary compactor—but that doesn’t mean you have to sacrifice when it comes to compacting power.

Cut your garbage hauling costs with the NC-100 model. Designed to fit your small space and customizable to suit the unique needs of your application, it still delivers the same power as a commercial compactor twice its size.

Safe and simple to operate, with quality design and construction you can count on, Nedland stationary compactors are the perfect fit for apartment buildings, hotels, restaurants, and recycling centers.

The Nedland 1 cubic yard stationary compactor will work hard for you, thanks to solid construction and features, like:

  • Bypass cylinders for extended life
  • Replaceable 1/2” UHMW polyethylene wear bars on ram sides and top and bottoms of platen for smooth, quiet, near-frictionless operation and extended life
  • Weatherproof control panel and power pack
  • Removable rear access panel
  • Container guide rails
  • Phosphatized-cleaned and powder-coat primed and painted on all interior and exterior surfaces to resist chips, scratches, and fading

Get industry-leading electrical and hydraulic features:

  • PLC-controlled power unit to prevent short stroking and compactor arm damage
  • Submersible power unit for continuous lubrication
  • Synthetic biodegradable hydraulic oil to support your commitment to sustainability
  • Industry’s highest quality UL and ETL listed components
  • Industry’s most advanced electrical and hydraulic system
  • E-stop button
  • Automatic single cycle
  • Auto/manual selector
  • Key lock on/off switch
  • Low oil sensor shutdown
  • Multi-cycle 80% - 100% full light
  • Automatic shutdown with auto safety retract
  • 15’ remote
  • Fluid level and temp gauge
  • Fluid-filled pressure gauge
  • Inlet fluid strainer
  • 15’ hydraulic hoses
  • Left or right side hydraulic connections

A range of receiver container sizes are compatible with the 1-yard stationary compactor, ensuring you get a set-up that perfectly suits your needs:

  • 2 yd rear load
  • 4 yd rear load
  • 6 yd rear load
  • 8 yd rear load
  • 2 yd front load
  • 4 yd front load
  • 6 yd front load
  • 8 yd front load

This stationary compactor conforms to all ANSI Z 245.2 safety standards.

This small commercial compactor will fit your small space—and still pack a punch.

1 cubic yard compactor dimensions
Side
1 cubic yard compactor dimensions
Top

Download our spec sheet

Overall length 64"
Overall width 58"
Overall height 49"
Compactor floor 1/2” steel AR plate with 3” structural channels
Compactor sides 1/4” steel plate with 3” x 2” x 1/4” structural steel tubing
Compactor capacity 1 cubic yard
Platen area 36” x 31 1/2” x 48”
Charge opening 31”x48”
Ram penetration 8"
Breaking bar 6” x 6” x 1/2” with retaining teeth
Twin bypass cylinders 2 1/2" x 36" x 1 1/2"
Hydraulic cylinder mounts 1/2” steel plate
Line pressure 2000 PSI
Max line pressure 2500 PSI
Max ram force 19500 Lbs
Cycle time 40 Seconds
Fluid capacity 35 Gallons
Pump 5 GPM
Motor 5 HP/Tri-Volt, 3 Phase
Loading height 43"
App. shipping weight 3400 Lbs

(All measurements are outside dimensions)

 
 

We’re happy to help you customize your stationary compactor.

Options include:

  • 5 HP 3-phase motor with a single-phase inverter
  • Fluid reservoir heater
  • Driver pack out
  • Open hopper
  • Enclosed doghouse with a door and interlock
  • Walk on or drive on deck with 42” safety rails
  • Side loading hoppers
  • Through-the-wall chutes
  • Cart dumper
  • Fullness monitoring system
 
 

We believe in the compactors we've designed and manufactured. It's why we can confidently offer the industry's best warranty.

Nedland Compactor Warranty

Scroll to Top