The largest self-contained units in our line-up, our 2 yard industrial compactors wit 40 cubic yard containers are true workhorses.
Regardless of your industry — hotel / motel, retail, healthcare, or food service — you can count on our industrial compactors to handily manage your wet waste for years to come.
Our 2 yard self-contained compactors are quality-built from the ground, up:
- 1/2" steel AR plate floor with 3" structural channels
- 1/4" steel plate sides with 4" x 2" x 1/4" & 6" x 2" x 1/4" structural steel tubing with 6" channel
- Breaker bar 6" x 6" x 1" with retaining teeth
- 6" fluid sump with 4" drain
- Replaceable 1/2" UHMW polyethylene wear bars on ram sides, tops and bottoms for a smooth, quiet and near frictionless operation
- Weatherproof control panel and power pack
- Removable rear and top access panels
- Synthetic biodegradable hydraulic oil
- Phosphatize-cleaned, inside and out
Our electrical and hydraulic features are second to none:
- Controlled power unit, or PLC
- E-stop button
- Automatic single cycle
- Auto/manual selector
- Key lock on/off switch
- Low oil sensor shutdown
- Multi cycle
- 80%-100% full lights
- Automatic shutdown with auto safety retract
- 15' remote
- Fluid filled pressure gauge
- Inlet fluid strainer
- 15' Hydraulic hoses
- Left or right hydraulic connections
Our industrial compactor containers feature:
- 3/16" steel plate floor with 6" x 2" x 1/4" structural steel tubing rails with 1/2" x 2" steel bottom wear bars
- 3/16" steel plate side, roof and door
- Full 3/4" thick door seal
- Side and bottom ratchet latch door closer
- Heavy-duty hinges with grease fittings
- Double end pick-up (standard with outside rail cable pull)
- Tapered width from 80" at compactor to 88" at door (inside dimension)
- Exclusive side and bottom ratchet door and latch system with heavy duty hinges and grease fittings
These industrial compactors conform to all ANSI Z 245.2 safety standards.
Specs? You’ve got it.
Download our Spec Sheet
| Overall length |
26' |
| Overall width |
101" |
| Overall height |
102" |
| Loading height |
48" |
| Container capacity |
40 cubic yards |
| Compactor capacity |
2 cubic yards |
| Platen area |
60" x 44" x 36" |
| Charge opening |
42" x 60" |
| Ram penetration |
12" |
| Twin cylinders |
4" x 42" x 2 1/2" |
| Line pressure |
2000 PSI |
| Max line pressure |
2500 PSI |
| Max ram force |
58000 Lbs |
| Cycle time |
45 Seconds |
| Fluid capacity |
35 Gallons |
| Pump |
10 1/2 GPM |
| Motor |
10 HP/Tri-Volt, 3 Phase |
| App. shipping weight |
11500 Lbs |
(All measurements are outside dimensions)
Customize your industrial compactors to get exactly what you need.
Options include:
- 10 HP 230V, single phase
- Fluid reservoir heater
- Open hopper (for dock or ground loading)
- Enclosed doghouse with door and interlock
- Walk on or drive on deck with 42" safety rails
- Side loading hoppers
- Through-the-wall chutes
- Cart dumper system
- Container guide rails
- Hydraulic tailgate
- Fullness monitoring system
Need some advice? We’re happy to help.
We believe in the compactors we've designed and manufactured. It's why we can confidently offer the industry's best warranty.
Nedland Compactor Warranty
