Between the most advanced electrical and hydraulic systems and the lowest maintenance cost design in the industry, our industrial waste compactors simply can’t be beat.
That’s why department stores, manufacturing facilities and large distribution centers buy from us—and stay with us for the long haul.
Stationary waste compactor features
Our 2 cubic yard stationary compactor is quality-built:
- 1/2″ steel AR plate floor with 3″ x 6″ structural steel channel
- 1/4″ steel plate sides with 4″ x 2″ x 1/4″ & 6″ x 2″ x 1/4″ structural steel tubing
- Breaker bar 6″ x 6″ x 1″ with retaining teeth
- 1/2″ hydraulic cylinder mounts
- Replaceable 1/2″ UHMW polyethylene wear bars on ram sides, top and bottoms of platen for smooth, quiet and near frictionless operation
- Weatherproof control panel and power pack
- Removable rear access panel
- Container guide rails
- Phosphatize-cleaned, inside and out
You can count on our industry-leading electrical and hydraulic features:
- (PLC) controlled power unit
- E-stop button
- Automatic single cycle
- Auto/manual selector
- Low oil sensor shutdown
- Multi cycle 80% – 100% full lights
- Automatic shutdown with auto safety retract 15′ remote
- Fluid level and temp gauge
- Fluid filled pressure gauge
- Inlet fluid strainer 15′ hydraulic hoses
- Left or right side hydraulic connections
- Synthetic biodegradable hydraulic oil
Select the receiver container size that’s right for you:
- 16 yd x 12′
- 21 yd x 14′
- 25 yd x 16′
- 30 yd x 18′
- 40 yd x 20′
This stationary compactor conforms to all ANSI Z 245.2 safety standards.
Specs for our 2 cubic yard stationary waste compactors
Need details on our industrial waste compactors? You’ve got it.
Side
Top
Download our Spec Sheet
| Overall length |
84″ |
| Overall width |
73″ |
| Overall height |
57″ |
| Compactor capacity |
2 cubic yards |
| Platen area |
60″ x 44″ x 36″ |
| Charge opening |
44″ x 60″ |
| Ram penetration |
12″ |
| Twin cylinders |
4″ x 42″ x 2 1/2″ |
| Line pressure |
2000 PSI |
| Max line pressure |
2500 PSI |
| Max ram force |
58000 Lbs |
| Cycle time |
45 Seconds |
| Fluid capacity |
35 Gallons |
| Pump |
10 1/2 GPM |
| Motor |
10 HP/Tri-Volt, 3 Phase |
| Loading height |
51″ |
| App. shipping weight |
4450 Lbs |
(All measurements are outside dimensions)
Your stationary waste compactor options
We’ll work with you to customize your waste compactor. Select from the following options:
- 10 HP 230V, single phase
- Fluid reservoir heater
- Driver pack out
- Open hopper (for loading dock or ground loading)
- Enclosed doghouse with door and interlock
- Walk on or drive on deck with 42″ safety rails
- Side loading hoppers
- Through-the-wall chutes
- Cart dumper
- Solar panel power unit
Steel product color chart
Red Enamel
Maroon Enamel
Armor Yellow
Nedland Gray
Chicagoland Gray
Brown Cocoa Enamel
Dark Brown
Black Enamel
Blue Enamel
Medium Blue
Allied Blue
U.S. Waste Green
Forest Green
Shamrock Green
Orange
Beige
Our stationary compactor warranty
You can count on your quality-built industrial waste compactors. But if something should go wrong, we’ve got you covered.
From the date we ship your compactor units from our manufacturing plant, your compactors will be covered under the following warranty:
- Three year warranty on structure
- One year warranty on electrical and hydraulic components
- Six months labor, limited to approved labor for the replacement of any defective good
Download our warranty
