0.5 Cubic Yard Stationary Compactor


small compactors for commercial and retain uses

Model: NC-50

Our NC-50 model small compactors are ideally suited for high-rise applications, such as apartment buildings, hospitals, hotels, nursing homes and office buildings. How so?

With a one-sided container connection system standard on every machine, you can easily connect and disconnect the container to the compactor, despite tight space constraints.

The NC-50 is the system you need for small trash rooms. Even better, it offers the power of a stationary compactor unit twice its size.

Small compactors, big features

Our NC-50 stationary compactor container features:

  • 5/16″ Steel AR plate floor with 3″ structural channels
  • 1/4″ steel plate sides with 3″ x 2″ x 1/4″ structural steel tubing
  • Breaker bar dimensions of 6″ x 6″ x 1/2″ with retaining teeth
  • 1/2″ steel plate hydraulic cylinder mounts
  • Replaceable 1/2″ UHMW polyethylene wear bars on all sides and bottoms for smooth, quiet, nearly frictionless operation
  • Weatherproof control panel and power pack
  • Removable rear access panel
  • Container guide rails
  • Phosphatize-cleaned, inside and out

NC-50 electric and hydraulic features:

  • PLC controlled power unit
  • E-stop button
  • Automatic single cycle
  • Auto/manual selector
  • Key lock on/off switch
  • Low oil sensor shutdown
  • Multi-cycle
  • 80% – 100% full lights
  • 15′ remote
  • Automatic shutdown with auto safety retract
  • Fluid level and temp gauge
  • Fluid filled pressure gauge
  • Inlet fluid strainer
  • 15’ hydraulic hoses
  • Left or right side hydraulic connections
  • Synthetic biodegradable hydraulic oil
  • Submersible power unit

NC-50 receiver container sizes:

  • 2 yd rear load
  • 3 yd rear load
  • 4 yd rear load
  • 6 yd rear load
  • 8 yd rear load
  • 2 yd rear load
  • 3 yd rear load
  • 4 yd front load
  • 6 yd front load
  • 8 yd front load

Specs for our smallest stationary compactors

We have the compactor that’s the just-right fit for your small space.

Overall length 48″
Overall width 40″
Overall height 47″
Compactor capacity 1/2 cubic yard
Platen area 20 1/2″ x 28 1/2″ x 29 1/2″
Charge opening 20 1/2″ x 29 1/2″
Ram penetration 4″
Twin cylinders 2 1/2″ x 20″ x 1 1/2″
Line pressure 2000 PSI
Max line pressure 2500 PSI
Max ram force 21000 LBS
Cycle time 40 Seconds
Fluid capacity 35 Gallons
Pump 5 GPM
Motor 5 HP/Tri-Volt, 3 Phase
Loading height 41″
App. shipping weight 2900 Lbs

(All measurements are outside dimensions)

Downloads

Download our Floor Plan See our Cover Sheet See our Spec Sheet

Download our Floor Plan
See our Cover Sheet
See our Spec Sheet

Options for your small compactors

With a range of options, you can customize your small stationary compactors to perfectly suit your unique needs:

  • 5 HP 230V, single phase
  • Fluid reservoir heater
  • Photo eye
  • Safety beacon and horn
  • Driver pack out
  • Open hopper for loading dock or ground loading
  • Enclosed doghouse with door and interlock
  • Walk on or drive on deck with 42″ safety rails
  • Side loading hoppers
  • Through-the-wall chutes
  • Solar panel power unit

Steel product color chart

Red Enamel
100%
Maroon Enamel
100%
Armor Yellow
100%
Nedland Gray
100%
Chicagoland Gray
100%
Brown Cocoa Enamel
100%
Dark Brown
100%
Black Enamel
100%
Blue Enamel
100%
Medium Blue
100%
Allied Blue
100%
U.S. Waste Green
100%
Forest Green
100%
Shamrock Green
100%
Orange
100%
Beige
100%

Our stationary compactor warranty

We stand behind our compactors.

From the date we ship your unit from our manufacturing plant, your compactor will be covered by a:

  • Three year warranty on structure
  • One year warranty on electrical and hydraulic components
  • Six months labor warranty, limited to approved labor for the replacement of any defective good

Read our warranty for additional details and restrictions.

Download our warranty