4 Cubic Yard Stationary Compactor


industrial compactor for transfer stations, municipalities, and recycling and industrial facilities

Model: NC-400

Our 4 cubic yard stationary compactor is not only the largest, most powerful industrial compactor we offer—it’s the best option available on the market today. How so?

Built using the most advanced electrical and hydraulic systems, plus the lowest maintenance cost design in the waste management industry, it just simply can’t be beat.

That’s why transfer stations, recycling facilities, municipalities and industrial facilities that need a rock solid stationary compactor they can count on, come to us.

Big features to match our largest stationary compactors

Our industrial compactor features include:

  • 1/2″ steel AR plate floor with 6″ x 8.2″ structural steel channels
  • 1/4″ steel plate sides with 3″ & 6″ x 8.2″ structural steel channels and 6″ x 2″ x 1/4″ structural steel tubing
  • Breaker bar 6″ x 6″ x 1″ with 5/8″ support plates and retaining teeth
  • 2-10″ i-Beam hydraulic cylinder mounts
  • Replaceable 1/2″ UHMW polyethylene wear bars on ram sides and bottoms of platen for a smooth, quiet and near frictionless operation
  • Weatherproof control access panel
  • Container guide rails
  • Phosphatize-cleaned, inside and out

Take a look at our industry-leading electrical and hydraulic features:

  • (PLC) controlled power unit
  • E-stop button
  • Auto/manual selector
  • Key lock on/off switch
  • Low oil sensor shutdown
  • Multi-cycle
  • 80% – 100% full lights
  • 15′ remote
  • Fluid level and temp gauge
  • Fluid filled pressure gauge
  • Inlet fluid strainer
  • 15’ hydraulic hoses
  • Left or right side hydraulic connections
  • Synthetic biodegradable hydraulic oil

Our receiver containers come in a variety of sizes to fit your specific needs:

  • 16 yd x 12′
  • 21 yd x 14′
  • 25 yd x 16′
  • 30 yd x 18′
  • 40 yd x 20′

This stationary compactor conforms to all ANSI Z 245.2 safety standards.

Specs for our 4 cubic yard stationary compactor

This thing is a horse. Just look.

Side
nc400 side diagram

 

 

 

Top
nc400 top diagram

 

 

 

 

Download our Spec Sheet

 

Overall length 16’6″
Overall width 73″
Overall height 64″
Compactor capacity 4 cubic yards
Charge opening 60″ x 78″
Ram penetration 14″
Bypass cylinder 7″ x 90″ x 4″
Line pressure 2 1/2″ x 20″ x 1 1/2″
Max line pressure 2000 PSI
Max ram force 77000 Lbs
Cycle time 40 Seconds
Fluid capacity 60 Gallons
Pump 40 GPM
Motor 20 HP/Tri-Volt, 3 phase
Loading height 57″
App. shipping weight 9750 Lbs

(All measurements are outside dimensions)

Customize your stationary industrial compactor with these options

Your satisfaction is our top priority. So, we’ll work closely with you to customize an industrial compactor to fit your exact specifications.

Options include:

  • 20 HP 230V, single phase
  • Fluid reservoir heater
  • Driver pack out
  • Open hopper
  • Enclosed doghouse with door and interlock
  • Walk on or drive on deck with 42″ safety rails
  • Side loading hoppers
  • Through-the-wall chutes
  • Cart dumper
  • Solar panel power unit

Steel product color chart

Red Enamel
100%
Maroon Enamel
100%
Armor Yellow
100%
Nedland Gray
100%
Chicagoland Gray
100%
Brown Cocoa Enamel
100%
Dark Brown
100%
Black Enamel
100%
Blue Enamel
100%
Medium Blue
100%
Allied Blue
100%
U.S. Waste Green
100%
Forest Green
100%
Shamrock Green
100%
Orange
100%
Beige
100%

Our stationary compactor warranty

We want you to feel great about your industrial compactor—and your relationship with us. That’s why we stand behind our products.

From the date we ship your compactor unit from our manufacturing plant, your compactor will be covered under the following warranty:

  • Three year warranty on structure
  • One year warranty on electrical and hydraulic components
  • Six months labor, limited to approved labor for the replacement of any defective good
Download our warranty